Photos

Clear Filters | 1721 - 1740 of 4312 results

SECAF visits Edwards 412th Test Wing Operating Location Plant 42

Secretary of the Air Force, Mr. Frank Kendall, arrives at Edwards 412th Test Wing Operating Location Plant 42 to see the latest innovation. (Air Force photo by Adam Bowles)
Details Download

Third iteration of AFTC Data Hackathon an innovation success

Christian Rios, 412th Emerging Technologies Combined Test Force engineer, works to create code that matches Enterprise Environmental, Safety, and Occupational Health Management Information System Data with air quality regulations during the Data Hackathon at Edwards Air Force Base, Calif., Aug. 10, 2022. Members from across AFTC combined efforts to tackle complex sourced problems with open-source and Air Force provided tools. (U.S. Air Force Photo/Tech. Sgt. Robert Cloys)
Details Download

Third iteration of AFTC Data Hackathon an innovation success

2nd Lt. Noah Diamond, 418th Flight Test Squadron flight test engineer, works to create code for quick access to data science competency surveys used to gather force readiness information for commanders during a Data Hackathon at Edwards Air Force Base, Calif., Aug. 10, 2022. Members from across AFTC combined efforts to tackle complex sourced problems with open-source and Air Force provided tools. (U.S. Air Force Photo/Tech. Sgt. Robert Cloys)
Details Download

Chill with Cryogenics

Senior Airman Justin Jones, 96th Logistics Readiness Squadron, puts on the last of his safety gear required to dispense liquid oxygen at Eglin Air Force Base, Fla. Liquid oxygen is added to military aircraft to provide breathable air for pilots and aircrews. (U.S. Air Force photo/Samuel King Jr.)
Details Download

Chill with Cryogenics

Petroleum, Oil and Lubricants Flight Airmen disconnect the liquid nitrogen transfer hose at Eglin Air Force Base, Fla. Liquid nitrogen, widely used as a coolant and freezing agent, is used by medical units, fire department, civil engineers, and in weapons testing across the base. (U.S. Air Force photo/Samuel King Jr.)
Details Download

Chill with Cryogenics

Senior Airman Thomas Garcia, 96th Logistics Readiness Squadron, breaks off the ice crystals that formed around a liquid nitrogen transfer hose at Eglin Air Force Base, Fla. Liquid nitrogen, widely used as a coolant and freezing agent, is used by medical units, fire department, civil engineers, and in weapons testing across the base. (U.S. Air Force photo/Samuel King Jr.)
Details Download

805th Combat Training Squadron/Shadow Operations Center-Nelllis building

Photo of the 805th Combat Training Squadron/Shadow Operations Center-Nelllis building, Nellis Air Force Base, Nevada, July 25, 2022. (U.S. Air Force Photo by Keith Keel)
Details Download

Building upon success, Tunnel 9 team looks to take 3D printing program to next dimension

Pictured is an up-close view of a petal orifice liner created at Arnold Engineering Development Complex Hypervelocity Wind Tunnel 9 in White Oak, Maryland, using additive manufacturing, otherwise known as 3D printing. The liner is integral to high Mach number tunnel runs at Tunnel 9 and can experience temperatures of several thousand degrees. The refractive metal part has an outside diameter of around 3 inches, an inside diameter of around 2 inches and is nominally 3 inches in length. Additive manufacturing machines at Tunnel 9 are also capable of much larger prints, in the ballpark of 18 to 24 inches in any direction. (U.S. Air Force photo)
Details Download

Building upon success, Tunnel 9 team looks to take 3D printing program to next dimension

Pictured is a petal orifice liner created at Arnold Engineering Development Complex Hypervelocity Wind Tunnel 9 in White Oak, Maryland, using additive manufacturing, otherwise known as 3D printing. The liner is integral to high Mach number tunnel runs at Tunnel 9 and can experience temperatures of several thousand degrees. The refractive metal part has an outside diameter of around 3 inches, an inside diameter of around 2 inches and is nominally 3 inches in length. Additive manufacturing machines at Tunnel 9 are also capable of much larger prints, in the ballpark of 18 to 24 inches in any direction. (U.S. Air Force photo)
Details Download

Building upon success, Tunnel 9 team looks to take 3D printing program to next dimension

Pictured is a petal orifice liner created at Arnold Engineering Development Complex Hypervelocity Wind Tunnel 9 in White Oak, Maryland, using additive manufacturing, otherwise known as 3D printing. The liner is integral to high Mach number tunnel runs at Tunnel 9 and can experience temperatures of several thousand degrees. The refractive metal part has an outside diameter of around 3 inches, an inside diameter of around 2 inches and is nominally 3 inches in length. Additive manufacturing machines at Tunnel 9 are also capable of much larger prints, in the ballpark of 18 to 24 inches in any direction. (U.S. Air Force photo)
Details Download

Ribbon Cutting for New Educational Complex at Edwards Air Force Base

Pamela Balch, a representative of Assemblyman Tom Lackey, presents a certificate to Kevin Cordes, Muroc Joint Unified School District Superintendent, inside the new performing arts theater at Desert Jr./Sr. High School on Edwards Air Force Base, California, Aug. 9. (Air Force photo by Giancarlo Casem)
Details Download

Ribbon Cutting for New Educational Complex at Edwards Air Force Base

Junior Miss Edwards Hailey Shartzer cuts the ribbon to officially open the new Desert Jr./Sr. High School on Edwards Air Force Base, California, Aug. 9. (Air Force photo by Giancarlo Casem)
Details Download

Ribbon Cutting for New Educational Complex at Edwards Air Force Base

Brig. Gen. Matthew Higer, 412th Test Wing Commander, provides his remarks during the ribbon cutting event for the Desert Jr./Sr. High School reopening on Edwards Air Force Base, California, Aug. 9. (Air Force photo by Giancarlo Casem)
Details Download

Ribbon Cutting for New Educational Complex at Edwards Air Force Base

Patrick O'Brien, Office of Local Defense Community Cooperation Director, provides his remarks during the ribbon cutting event for Desert Jr./Sr. High School on Edwards Air Force Base, California, Aug. 9. (Air Force photo by Giancarlo Casem)
Details Download

Ribbon Cutting for New Educational Complex at Edwards Air Force Base

Kevin Cordes, Muroc Joint Unified School District Superintendent, provides his remarks during the ribbon cutting event for the Desert Jr./Sr. High School reopening on Edwards Air Force Base, California, Aug. 9. (Air Force photo by Giancarlo Casem)
Details Download

Siddiqui takes command of 586th Flight Test Squadron

Lt. Col. Sean Siddiqui, 586th Flight Test Squadron commander, provides remarks during a change of command ceremony on Holloman Air Force Base, New Mexico, July 15, 2022. (U.S. Air Force photo by Airman 1st Class Antonio Salfran)
Details Download

Siddiqui takes command of 586th Flight Test Squadron

Lt. Col. Sean Siddiqui, right, takes command of the 586th Flight Test Squadron from Col. Darren Wees, 704th Test Group commander, on Holloman Air Force Base, New Mexico July 15, 2022. The 586th FLTS plans, analyzes, coordinates and conducts flight tests of advanced weapons and avionics systems primarily on the White Sands Missile Range. (U.S. Air Force photo by Airman 1st Class Antonio Salfran)
Details Download

No Line Between Us: How civilians and active duty work shoulder-to-shoulder in Air Traffic Control

Continuing on our series "No Line Between Us", we show how civilians and active duty work shoulder-to-shoulder for the mission in Air Traffic Control on Edwards AFB.
Details Download

No Line Between Us: How civilians and active duty work shoulder-to-shoulder in Air Traffic Control

Continuing on our series "No Line Between Us", we show how civilians and active duty work shoulder-to-shoulder for the mission in Air Traffic Control on Edwards AFB.
Details Download

Raytheon Multi-Program Testbed (RMT-727)

courtesy photo
Details Download